News List
SMKTOP > Press release list|April, 2008 ~ March, 2009 > Rack & panel connector, "RP-1 series", mountable in the floating system, developed
 

Rack & panel connector, "RP-1 series", mountable in the floating system, developed

We are pleased to announce the development and commencement of marketing of a rack & panel connector, the “RP-1 series".  Specifics of this connector are given below.

 

This new product is a rack & panel connector featuring 30 2.0 mm-pitched pins, developed for unit-to-unit connection of diversifying amusement equipment.  The employment of our originally devised flange structure has made it possible to mount a plug to a unit in a floating system.  The use of a floating system allows deviation of unit locations occurring when they are connected to be absorbed for positive connection (An absorbable maximum deviation extends up to 1.3 mm in 4 directions of backward, forward, left and right).

 

It has 30 pins, 4 for power and 26 for signals.  Sequential contact timing is provided between the power and signal lines for ensured ONs and OFFs on the signal line.  The contact length of the socket and plug is 3.8 mm minimum for high contact reliability.  This connector will be an optimal choice for connection of amusement equipment and office equipment where high level contact reliability such as resistance to vibration is required.


Date Released Dec. 19, 2008
Press Release No. 846cs 
Product Name
Rack & panel connector, RP-1 series
Drawing Nos: Socket CSS5030-9001F
                  Plug CS1030-9001F
                  Terminal       CTA5122-0701F
Features
  • 1) Rack & panel connector with 30 2.0 mm-pitched pins (4 for power and 26 for signals) arranged in 2 rows.
  • 2) PWB mounting type for the socket and wire crimping type for the plug.
  • 3) The plug can be mounted in a floating system.  Positional deviations which can occur when units are connected will be absorbed for positive connection (amount of floating: within +/-1.3 mm).
  • 4) Sequential contact timing is provided between the power and signal lines for ensured ONs and OFFs on the signal line.
    ・Power line pins: Nos. 1, 2, 29 and 30
    ・Signal line pins: Nos. 3 to 28
  • 5) The contact length of the socket and plug is 3.8 mm minimum for high contact reliability.
  • 6) Wire sizes adaptable to the plug terminals are AWG 22 - 24.
  • 7) RoHS Directive compliant.
Major specifications
Voltage and Current Rating  2A, 50V DC
Contact Resistance 10mΩ max.
Insulation Resistance 1000MΩmin. at 500V DC
Withstanding Voltage 500V AC for one minute
Operating Temperature Range - 20℃ to 70℃
Applications Amusement equipment, office equipment, etc.
Market introduction Dec. 2008
Production capacity 300,000 sets/month
Inquiry * For more information, please contact the CS Division
Fax : 81-3-3785-0517