News List
SMKTOP > Press release list|April, 2006 ~ March, 2007 > Industry's shortest 0.75 mm-high, when mounted, and 0.4-mm-spacing FPC connector

Industry's shortest 0.75 mm-high, when mounted,
and 0.4-mm-spacing FPC connector

We are pleased to announce that we have developed and commenced marketing of a 0.4 mm-spacing FPC connector, for particulars of which, please refer to the description below.

As design of portable equipment such as mobile phones and DSC gets smaller and thinner and more functional, FPC connectors for internal connection are no exception from increasing market requirements for narrower spacing, downsizing, and higher density mountability.

A height of only 0.75 mm when mounted and depth of 3.6 mm render this connector the industry’s shortest. Employment of our exclusive separate upper and lower contact design (patents applied for) makes both sides of FPCs usable. Half the space previously taken is now sufficient to mount, helping reduce mounting space on PWBs. (For example, 15 poles x 2 rows => 30 poles in the previous 15-pole space) Use of a single surface FPC offers users an option for use of either the upper or lower contacts.

The upper surface of the connector is made up of a shield cover. Resulting provision of shielding performance and enhancement of connector strength further stabilize contact reliability. Combined use with a shielded FPC will make counter-noise efforts more effective.

With the employed contacts being of an N-ZIF structure, even easier FPC insertability is realized. Also, mechanisms for prevention of unintentional disengagement and of incomplete FPC insertion are provided.


Date Released Aug. 29, 2006
Press Release No. 755cs
Product Name
0.4mm spacing FPC connector
Product No. CFPB130-0101F
Features
  • 1) Low 0.75 mm high and 3.6 mm deep small and low profile design.
  • 2) The structure for independent upper and lower contacts (patents applied for) permits use of top and bottom surfaces separately for more effective PWB surface utilization. (For example, 15 poles x 2 rows => 30 poles in the previous 15-pole space) Use of a single surface FPC offers users an option for use of either the upper or lower contacts.
  • 3) The upper surface of the connector is made up of a shield cover. Resulting provision of shielding performance and enhancement of connector strength further stabilize contact reliability. Combined use with a shielded FPC will make counter-noise efforts more effective.
  • 4) One single action completes FPC insertion because the contacts are of an N-ZIF (Non-Zero Insertion Force) structure. Unlike previous lateral insertion direction, this vertical insertion design from the top improves operability.
  • 5) Our exclusive structure ensures a high level of retention force. Mechanisms for prevention of unintentional connector disengagement and incomplete FPC insertion are featured.
  • 6) RoHS Directive compliant.
Major specifications Voltage and Current Rating 0.2A, 50V AC/DC
Contact Resistance 30mΩ max. initially
Insulation Resistance 100MΩ min. at 100V DC
Withstanding Voltage 100V AC for one minute
Operating Temperature Range -40°C to +85°C
Applications Mobile phones, DVCs, DSCs, etc.
Market introduction August 2006
Production capacity 500,000 units/month
Inquiry * Please contact CS Division for further information
Fax : 81-3-3785-2904